SNMP Alerts

The Simple Network Management Protocol (SNMP) alert sends an SNMP trap to an SNMP management console, or server. This option integrates Dotcom-Monitor alerts directly into an IT management system, so alerts are treated and routed like any other alert within an enterprise. Currently, Dotcom-Monitor® supports SNMP v1, v2 and v3. Dotcom-Monitor has a registered EnterpriseOID, which is 31201. Alerts are sent as an Enterprise type, which is value six. For custom bit, an Error alert is value one ; an Uptime alert is value two; and a Test alert is value three. Alerts are sent over the Internet on a standard SNMP port.

Here is Dotcom-Monitor trap MIB file:

 -- Dotcom-Monitor Inc
 -- Private Enterprise MIB definition
 -- 09/02/2015

 --Dotcom-Monitor Support
 --Postal: 5125 County Road 101, Suite 100
 --        Minnetonka, MN 55345
 --        USA
 --
 --        Tel: 888-479-0741; Fax: 888-794-3554
 --
 --        E-mail: Support@Dotcom-Monitor.Com


 -- This file describes the Dotcom-Monitor Inc Enterprise MIB.
 -- It includes object identifiers and object definitions for the 
 -- Dotcom-Monitor Inc only, and should be used for compilation by a management
 -- tool in order to extend the tool to support the Dotcom-Monitor Inc MIB.  

    DOTCOM-MONITOR-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        TRAP-TYPE
                FROM RFC-1215
        DisplayString
                FROM RFC1213-MIB
        OBJECT-TYPE
                FROM RFC-1212
        enterprises
                FROM RFC1155-SMI;
                    
 -- tree structure

	dotcom-monitor			OBJECT IDENTIFIER ::= { enterprises 31201 }
	variables			OBJECT IDENTIFIER ::= { dotcom-monitor 255 }
  -- variables
  
  notificationInfo OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "Information about the source of notification."
    ::= { variables  1 }
    
	-- Generic Traps
	
	event	TRAP-TYPE
	ENTERPRISE	dotcom-monitor
        VARIABLES       { 
                        notificationInfo
                        }
	DESCRIPTION	"This indicates that the trap contains info about Device Events"
	::= 1
	
	uptime	TRAP-TYPE
	ENTERPRISE	dotcom-monitor
        VARIABLES       { 
                        notificationInfo
                        }
	DESCRIPTION	"This indicates that the trap contains info about Device Uptime"
	::= 2
	
	error  	TRAP-TYPE
	ENTERPRISE	dotcom-monitor
        VARIABLES       { 
                        notificationInfo
                        }
	DESCRIPTION	"This indicates that the trap contains info about Device Errors"
	::= 3

	test	TRAP-TYPE
	ENTERPRISE	dotcom-monitor
        VARIABLES       { 
                        notificationInfo
                        }
	DESCRIPTION	"This is the trap that used for test purposes only."
	::= 4
	
	
	
	
END
Info
In order to make SNMP alerts work properly please allow the following IP range in your firewall settings: 207.250.234.0/24