Since Load Injectors (LIs) are initiated dynamically for a test, the list of IPs allocated for the test is not static and different for each test run.

If you have to test a target resource behind a firewall, you need to allow traffic from LI IP addresses in your network. In this case, use the Static Proxy option to run the test from predefined static IP addresses and whitelist these IPs in advance. 

Generally, if it is necessary to get IPs which were used for the test, download the list immediately after starting the test as described here.

It is highly recommended to use the Static Proxy option ONLY to whitelist LI IPs. Otherwise, select geographical zones with dynamically initiated LIs.  

Activate the Static Proxy option in the Load Injector Geo Distribution section to send the traffic from static IP addresses. Once the option is activated, add zones and whitelist IP addresses associated with the selected  zones.

Find the list of IP addresses corresponding to each zone in the table below. Make sure you have whitelisted all IPs provided next to a zone name in the table (two more backup addresses are used).

  • Static Proxy IPs Breakdown by Geo Zones

To test from all available Static Proxy zones whitelist all IPs.

  • Static Proxy IP Addresses List


Load testing from the dedicated IP addresses is supported for Amazon Cloud only.