To set up Dynamic Variables for the test you need to create the list of values in a CSV file and upload it to the test scenario. 

You can only upload values for the Context Parameters if they’ve been previously set up.

You can create the CSV file with Dynamic Variables and upload it to the test manually or use a preconfigured LoadView template.

To set up the Dynamic Variables with the template, on the Test Scenario page:

  1. Go to the Dynamic Variables section.
  2. Click Download Template to create the list with the template.
  3. Open the downloaded Default.csv template file. The file contains columns with the Names of the Context Parameters in the headers. Enter the set of values in the rows of the column and save the file. Values do not have to be unique.

    Make sure the number of values (rows) in the file is no less than the maximum number of simultaneous virtual users your test is set up for. 

    The figure below shows the spreadsheet of dynamic variables of multiple user logins and passwords. In this case, the maximum number of virtual users simulated for the test must be 10 or less. 
  4.  To add the list to the test scenario, go back to the Test Scenario page, the Dynamic Variables section, click Upload Data CSV and upload the file.